Tools & Waxes

VG35 BASE BINDER GREEN, 45G A durable basewax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

BASE CLEANER LIQUID 500 ML Lightly scented liquid base cleaner. Remove as much was or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. 17.5 fl. oz. DANGER H-sentence number: H226, H304, H336, H412, EUH066 H-sentence: Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

I62C BASE CLEANER AEROSOL 150 ML Aerosol spray-on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 5.1 fl. oz. DANGER H-sentence number: H222, H229, H336, H412, EUH066 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

I61C BASE CLEANER AEROSOL 70 ML Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 2.4 fl. oz. DANGER H-sentence number: H222, H229, H336, H412, EUH066 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

I91C BASE CLEANER SET W./I62C,T0151 Base cleaner set containing: 150 ml aerosol Base Cleaner and 20 m Fiberlene Cleaning Towel. Lightly scented. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper.

VG30 BASE WAX, BLUE, 43G To be used as first layer for all hard waxes in new fallen snow, transformed fine grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

T160B BRUSH RECT., FINE BLUE NYLON Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

Swix Rectangular Blue Nylon Brush T0160B Nylon polish brush for all waxes All blue bristles

BP99 BASE PREP SOFT, 180G A soft wax with low melting point. Recommended as the first wax on all new skis to make the base accustomed to hot irons. BP99 is also recommended for skis or boards in the “Hot Box”. The temperature in the Hot Box should never be higher than 55°C/130°F. Higher temps than 55°C in the hot box can cause delamination of the base. Fluor Free Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS For initial waxing Low melting point and easy to work with

BP77 HARD, 180 G A harder Baseprep for new DH, GS and SL skis used for all conditions. Can also be used for glacier training. The wax is easy to work with and gives the ski bases a nice looking finish. Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS A hard base prep wax Great for alpine ski

BP88 BASE PREP MEDIUM, 180G For normal winter conditions, 0°C to -10°C. The All Round Base Prep wax for most skis/boards. Used on new skis and as travel wax. Fluor Free Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS Allround base prep wax For typical winter conditions

T162O BRUSH OVAL, MEDIUM BRONZE Medium bronze brush. Ø 0.15 mm. First brush used after scraping. For brushing glide wax out of the structure. 10 strokes.

T162SB BRUSH SMALL RECT.,M,BRONZE Practical pocket sized bronze brush. First brush used after scraping. For brushing glide wax out of the structure.

The Swix Wild Boar Brush is an important brush for any racer using Cera F Wax. The Wild Boar Brush is recommended for use as the second brush for Cera F wax applications. The Wild Boar can be used in place of a Horsehair brush, and run 5 to 10 strokes tip to tail after running the Stiff Black Nylon Brush. Because of the differences in wax properties it is highly recommended that brushes used for Cera F are kept as strictly Cera F brushes. Recommended by Swix as the Second Brush on Cera F Applications: 5 to 10 strokes 0.15 mm Fibers

T19S ROTOBRUSH STEEL, 100MM Fine steel brush to clean base structures before waxing. Can be used as second brush on wax after T16M Horsehair brush. We recommend to deburr the steel lightly with sandpaper #100 before using it the first time on skis. 100 mm wide.

HS8 LIQ. RED, -4°C/+4°C, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. Replaces the CH8XL HIGHLIGHTS Fantastic allround glider For racing and competition Non-fluoro Exists also as warm glider Well tested on many conditions

Contains:CH6 x Blue 20 g, CH7 x Violet 20 g y CH8 x 60 g red 20 g

Temperature range from -12°C to -32°C (12°F to -26°F). Recommended iron temp.: 150°C (300°F). CH03X is a special synthetic hydrocarbon powder wax to add to other waxes to increase their durability and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle CH03X over the wax. Even a generous amount will not effect glide. Then iron the CH03X powder into the wax layer. Allow cooling, then scrape and brush away the excess. CH3X Cold Powder, 30g Fluor Free Powder wax for cold condtions. Suits condtions from -12°C to -32°C. For touring and racing skiers. Great for training and competition. DETAILS Extremely durable Perfect on cold man-made snow

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt, for application of Cera F.

T12 SYNTHETIC RACING CORK W/HD This synthetic cork has a higher density than a regular synthetic cork. For racing.

F4-100C GLIDEWAX LIQUID 100ML F4 Universal All Temperature Liquid wax. For all skis and snowboards. All snow conditions. With foam applicator and felt polisher. Handy ergonomic pocket size. Apply, polish and go! DANGER H-sentence number: H225, H319, H336 H-sentence: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.

F4-60 GLIDEWAX 60G W/CORK F4 Universal All Temperature Solid rub on wax. For skis and snowboards. All snow conditions. Economic and long lasting. No solvents. Handy pocket size with cork on the back. Rub on, cork in and go! Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

F4-60W GLIDEWAX WARM 60G W/CORK F4 Warm Premium Solid with cork on the back. -4°C/25°F and warmer. Rub on performance wax, a natural step up for the F4 consumer that require the little extra. For all skis and snowboards. For all snow conditions. Economic and long lasting. No solvents. Handy pocket size. Rub on, cork in and go! Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

F4 Warm Premium Liquid Performance Wax. -4 ° C / 25 ° F and warmer. For all skis and snowboards. For all snow conditions. A natural step for the F4 consumer who requires a little more. Better glide and more durable. Based on HVC technology. With foam applicator and felt polisher. Practical ergonomic pocket. Based on Future Cera's raw materials, which provide high quality and an environmentally friendly profile. Danger: Highly flammable liquid and vapours. Causes serious eye irritation. May cause drowsiness or dizziness.

Durable cleaning paper. Quality paper for all-round use.

T107X FILE CHROM BASTARD, 20CM 13TP 8"/20 cm. 13 tpcm. Chromed Bastard removal/setup file. Best file for setting side angle. Non-tang files offer a truer, flatter file for exact degree application. Best file for initial side bevel.

TA22 FILE CLAMP W/SPRING Clamp with spring to fix file to holder. Fits all Swix filing tools. Strong construction.

T104X FILE CHROM F-CUT, 15CM 20TPCM 6"/15 cm. 20 tpcm, fine cut. Chromed Finishing File, shorter in length, increased TPCm to smooth out all striations left by 2nd cut file. Most durable, best cutting 6” file Swix offers.

TS5 BLACK, -10°C/-18°C, 40G The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F) The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. DETAILS Durable wax for cold condtions Versatile in cold conditions

T77 WAXING IRON ECONOMY, 110V 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).