Tools & Waxes

Swix Rectangular Blue Nylon Brush T0160B Nylon polish brush for all waxes All blue bristles

TS5 BLACK, -10°C/-18°C, 40G The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F) The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. DETAILS Durable wax for cold condtions Versatile in cold conditions

PS5 TURQUOISE, -10°C/-18°C, 180G/60G The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. ACTIVITIES Alpine Alpine Biathlon Biathlon CrossCountry Cross Country CrossCountryRacing Cross Country Racing Randonee Randonée Snowboard Snowboard

Base and groove scraper. Used for klister application. Or to remove wax or klister from the base before cleaning with Base Cleaner.

T161O BRUSH OVAL, WHITE NYLON Good quality all-round nylon brush for cross-country/alpine skis and snowboards.

Temperature range from -12°C to -32°C (12°F to -26°F). Recommended iron temp.: 150°C (300°F). CH03X is a special synthetic hydrocarbon powder wax to add to other waxes to increase their durability and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle CH03X over the wax. Even a generous amount will not effect glide. Then iron the CH03X powder into the wax layer. Allow cooling, then scrape and brush away the excess. CH3X Cold Powder, 30g Fluor Free Powder wax for cold condtions. Suits condtions from -12°C to -32°C. For touring and racing skiers. Great for training and competition. DETAILS Extremely durable Perfect on cold man-made snow

V50 VIOLET HARDWAX 0C, 43G New fallen snow 0°C (32°F). Old fine grained snow -1°C to -3°C (30°F to 27°F). For many years a secret weapon in the wax-box of World Cup Servicemen. To be used when the snow is in a stage going from cold to wet, around freezing (32°F). The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

T149-50 VISE 3-PARTS, 50MM JAWS Three piece vise with 50 mm wide jaws. Opens from 40 mm to 100 mm, for better grip and stability when working on carving skis and radial alpine skis. Two angles for side edge position; 60 degrees and 90 degrees. 60 degrees gives better control for side edge work.

T144 VISE 2 POINT FRICTION For freeride and alpine. Two point economy vise based upon rubber friction. 60 and 90 degree side edge working position. Light weight and compact.

T330 SANDPAPER, 5 PCS #100 Medium sandpaper. 5 pcs. pr. package. Silicon carbide abrasives. This very hard and sharp abrasive is best suited for working on bases and edges. For rubbing the kick zone on cross-country skis and for polishing alpine ski bases after polystick repair.

T350 SANDPAPER, 5 PCS #180 Fine sandpaper. 5 pcs. per package. Silicon carbide abrasives. This very hard and sharp abrasive is best suited for working on bases and edges. For rubbing the kick zone on cross-country skis. Kan also be used to polish plastic sidewalls on alpine skis.

T12 SYNTHETIC RACING CORK W/HD This synthetic cork has a higher density than a regular synthetic cork. For racing.

T19S ROTOBRUSH STEEL, 100MM Fine steel brush to clean base structures before waxing. Can be used as second brush on wax after T16M Horsehair brush. We recommend to deburr the steel lightly with sandpaper #100 before using it the first time on skis. 100 mm wide.

T77 WAXING IRON ECONOMY, 110V 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).

TA22 FILE CLAMP W/SPRING Clamp with spring to fix file to holder. Fits all Swix filing tools. Strong construction.

T107X FILE CHROM BASTARD, 20CM 13TP 8"/20 cm. 13 tpcm. Chromed Bastard removal/setup file. Best file for setting side angle. Non-tang files offer a truer, flatter file for exact degree application. Best file for initial side bevel.

TA101N SIDEWALL CUTTER Sidewall Cutter. For gradually removing plastic side-edges on skis and snowboards to expose more of the steel edges. Makes filing easier.

T75110NO NORTH WAXING IRON 110V The most important function of a waxing iron is temperature control! Variable temperature function for all wax types and an ergonomic shaped handle for easy movement along the base. Don’t use Mom’s iron on your valuable piece of equipment!

BASE CLEANER LIQUID 500 ML Lightly scented liquid base cleaner. Remove as much was or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. 17.5 fl. oz. DANGER H-sentence number: H226, H304, H336, H412, EUH066 H-sentence: Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

T161SB BRUSH SMALL RECT., NYLON Practical pocket sized all round brush. For cross country and alpine skis. Good quality.

F4-60 GLIDEWAX 60G W/CORK F4 Universal All Temperature Solid rub on wax. For skis and snowboards. All snow conditions. Economic and long lasting. No solvents. Handy pocket size with cork on the back. Rub on, cork in and go! Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

PS6 BLUE, -6°C/-12°C, 60G/ 180G PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X

V60 RED/SILVER HARDWAX 0/+3C, 43G New fallen snow 0°C to +3°C (32°F to 37°F). Old fine grained snow +1°C to -1°C (34°F to 30°F). For wet new snow up +3°C (38°F) and down to -1°C (30°F) in older more transformed granular snow. Apply thicker the warmer it is to secure grip. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

T1706B P-STICK TRANSP,6MM,10PCS,40G Polysticks for base repair. Easy to work with. Ø 6 mm. One package: 10 pcs.

Includes: Liquid Mountain Liberty Wax, features a formula of All-Weather 40 mm pocket sharpener Edge provides an all-in-one pocket edge sharpener tool: Edge side (87 to 88°) and an Edge base (0.5 to 1°) pocket sharpener Diamond Grooms for a Razor Sharp Edge to be worn on Hard Diamond Sharpener, Packed ground edges 87 to 89°/bronze combined nylon brush and wax paste for all-around dusting brush combined performance has two uniquely designed bristles that work together to polish Cork polishing provides substantial friction to soften any liquid, paste or solid wax

I62C BASE CLEANER AEROSOL 150 ML Aerosol spray-on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 5.1 fl. oz. DANGER H-sentence number: H222, H229, H336, H412, EUH066 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

T0149-90N POWER PRO VISE 155MM For wide skis up to 155 mm. Centerpiece is 30 mm further out from table compared to the other vises for better alignment with supports. Supports in front and back with screw fixation. Perfect for jumping skis and freeride skis.

T17W ROTOBRUSH NYLON, 100MM Finish and polish brush for paraffin wax and Cera F. 100 mm wide.

PS7 VIOLET, -2°C/-8°C, 180G/ 60G PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. ACTIVITIES Alpine Alpine Biathlon Biathlon CrossCountry Cross Country CrossCountryRacing Cross Country Racing Randonee Randonée Snowboard Snowboard

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt, for application of Cera F.